Questions from the Community
What is the specification for the battery for the remote?
What is the specification for the battery for the remote?
-
A.
The cyclone remote uses c2025 batteries.
how can i make a software update?
how can i make a software update?
-
A.
Please email support@satechi.com to receive the software update.
The display is scrolling. I'm using the rca jacks as there's no HDMI.hitting the...
The display is scrolling. I'm using the rca jacks as there's no HDMI.hitting the set-up and changing the av/mode doesn't stop the scrolling.
Thank you
-
A.
This issue is usually due to the unit’s video output setting and can be resolved by changing this setting from PAL to NTSC. You can do this in the setup menu by selecting video output.
However, if you are unable to navigate here due to the screen scrolling too fast, you should follow these steps:
make sure the remote is directly in front of the sensor and turn it on, next press the setup button, press the down arrow once then press enter, press the down arrow twice then press enter, press the down arrow once more then press enter.
Why is the screen blurry and flickering when I plug the composite into the TV?
Why is the screen blurry and flickering when I plug the composite into the TV?
-
A.
The issue you’re experiencing is due to a video output setting that is required for your current TV/Display and you will need to switch it to the correct mode. Your TV most likely requires the NTSC output which is rather difficult to change without being able to see a clear picture. Below you will find the steps to change this setting:
First, make sure the remote is directly in front of the Cyclone’s sensor and turn it on, next press the setup button, press the down arrow once then press enter, press the down arrow twice then press enter, press the down arrow once more then press enter. If the first attempt is unsuccessful, you may need to repeat this process as it’s possible the remote didn’t catch all the buttons pressed.
What is the specification for the battery for the remote?
-
A.
The cyclone remote uses c2025 batteries.
how can i make a software update?
-
A.
Please email support@satechi.com to receive the software update.
The display is scrolling. I'm using the rca jacks as there's no HDMI.hitting the set-up and changing the av/mode doesn't stop the scrolling. Thank you
-
A.
This issue is usually due to the unit’s video output setting and can be resolved by changing this setting from PAL to NTSC. You can do this in the setup menu by selecting video output.
However, if you are unable to navigate here due to the screen scrolling too fast, you should follow these steps:
make sure the remote is directly in front of the sensor and turn it on, next press the setup button, press the down arrow once then press enter, press the down arrow twice then press enter, press the down arrow once more then press enter.
Why is the screen blurry and flickering when I plug the composite into the TV?
-
A.
The issue you’re experiencing is due to a video output setting that is required for your current TV/Display and you will need to switch it to the correct mode. Your TV most likely requires the NTSC output which is rather difficult to change without being able to see a clear picture. Below you will find the steps to change this setting:
First, make sure the remote is directly in front of the Cyclone’s sensor and turn it on, next press the setup button, press the down arrow once then press enter, press the down arrow twice then press enter, press the down arrow once more then press enter. If the first attempt is unsuccessful, you may need to repeat this process as it’s possible the remote didn’t catch all the buttons pressed.
Loading...
Was this Answer Helpful?